Alkaline Hydrogen Water Filters

1st stage Sediment Water Filter : For Filter for removing fine contaminants

A sediment filter acts as the primary filter of the 4-layered water filtration system by effectively getting rid of relatively large impurities such as dirt and rust residues inside the water source. It also prevents these bulk impurities from blocking other finer filters, enhancing the performance and lifespan of the alkaline water filter set as a whole.

Specifications

Amount of Water Purifiable  Permissible Pressure Permissible Tempature Filter Material
3,600L
(951Gal)
1.8kgf/cm3
(14—114psi)
1.8kgf/cm3 (14—114psi) Polyethylene

2nd stage Pre-carbon Filter : Filter for removing organic compounds and odour

Pre-carbon filter acts as the secondary filter of the 4-layer filtration system. With great absorbability, the filter is able to absorb and eliminate chlorine and other organic chemicals, as well as unpleasant odour active matter (tri-halo-methane, chlorine residue, etc.) inside the water sources.

Specifications

Amount of Water Purifiable  Permissible Pressure Permissible Tempature Filter Material
3,600L (951Gal) 1.8kgf/cm3 (14—114psi) 1.8kgf/cm3 (14—114psi) Active Carbon

3rd stage Hybrid Filter Ⅰ : Filter for removing bacteria, virus, heavy metals and chlorine

Hybrid filter Ⅰ acts as the tertiary filter of the 4-layer filtration system. It is able to remove harmful chemicals such as Chlorine, Iron, Hydrogen Sulfide, as well as heavy metal ions in the water source.

4th stage Hybrid Filter Ⅱ : Filter for pH level control, maintenance of reducing power and generation of high quality hydrogen

Hybrid filter Ⅱ acts as the last filter of the 4-layer filtration system. It further removes water contaminants such as waterborne micro-organisms and harmful organic chemicals, while controlling the pH level of the water (into pH 9.0), keeping negative ORP value and generating hydrogen nano bubbles for the ultimate drinking experience.